WhatsApp: +1 314 203 6465

Projects

Home » Projects » Projects » 400 M² Variety TV Studio: Acoustics, Light & Rigging

400 M² Variety TV Studio: Acoustics, Light & Rigging

Views: 168     Author: Saijia Acoustic     Publish Time: 2026-11-19      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
Reddit sharing button
Threads sharing button
sharethis sharing button

Qingyuan Radio and Television Station’s 400 m² Variety Show Studio Systems Project: From Design Concept to Delivery in 120 Days


On the third floor of the Qingyuan Radio and Television Station building in Qingcheng District, Qingyuan, the space was originally an unfinished floor with a ceiling height of approximately 11 m and a total area of about 890 m². It had a concrete floor, exposed services, and a full-height glass curtain wall along one side. Beginning in September 2024, the space underwent a complete transformation from design to system delivery. In April 2025, Guangzhou Saijia Acoustics & Lighting Engineering Co., Ltd. won the contract for the “Qingyuan Radio and Television Station 400 m² Variety Show Studio Procurement Project (Decoration, Lighting, Audio, Acoustics and Stage Machinery Systems).” The project covered nine systems: acoustic fit-out, stage lighting, sound reinforcement, LED displays, stage machinery, intelligent central control, power distribution, and air conditioning, together with their integrated engineering works. Following the timeline from design and pre-construction preparation through key construction stages, completion and acceptance, this case study provides a comprehensive account of the development of a prefecture-level broadcast and television variety studio. It is intended as a reference for broadcasters, enterprises and public institutions planning studios, integrated media centres, auditoriums or theatres.


1. Project Overview

Project Item

Details

Project Name

Qingyuan Radio and Television Station 400 m² Variety Show Studio Procurement Project (Decoration, Lighting, Audio, Acoustics and Stage Machinery Systems)

Purchaser

Qingyuan Radio and Television Station

Tendering Agent

Qingyuan Youce Project Management Co., Ltd.

Contractor

Guangzhou Saijia Acoustics & Lighting Engineering Co., Ltd.

Scope of Work

Detailed design, supply, installation and commissioning of the acoustic fit-out, stage lighting, sound reinforcement, LED displays, stage machinery, intelligent central control, power distribution, air conditioning and other systems for the 400 m² variety show studio

Required Duration

Completion within 120 days from the effective date of the contract

Project Location

Third floor of the Qingyuan Radio and Television Station building (approx. 11 m floor-to-ceiling height; total third-floor area approx. 890 m²)

Acoustic Design Targets

Reverberation time: 0.65 ±0.1 s; background noise: NR-25; Rapid Speech Transmission Index (RASTI): 0.65 (according to the acoustic fit-out design description)


2. The Story Behind the Project: Design Stage (2024) — Creating an Immersive, Smart Studio

The success of a high-quality studio is determined long before construction begins. The early development of this project can be traced to three technical documents prepared in the second half of 2024: the site survey record dated September 5, 2024; the Qingyuan TV Studio Design Proposal dated November 7, 2024; and the Preliminary Cost Estimate for the 400 m² Studio on the Third Floor dated November 22, 2024. Together, these documents established the studio’s acoustic positioning, operating modes, architecture of the nine systems and overall investment plan, forming the technical basis for the subsequent tender and construction.


2.1 Site Survey: Design Inputs for an Unfinished Floor with a Glass Curtain Wall

The studio is located on the third floor of the Qingyuan Radio and Television Station building. The floor-to-ceiling height is approximately 11 m, and the total area of the third-floor zone is about 890 m². Site survey photographs show an unfinished space with a concrete floor, exposed air ducts and cable trays. The most prominent feature is a full-height glass curtain wall along one side. While it provides an open view and abundant daylight, it is a typical weak point in the sound insulation of a studio: outdoor traffic noise and noise from activity inside the building may pass through the curtain wall into the recording area. This site condition made dedicated sound insulation on the curtain-wall side the project’s top construction control priority (see Chapter 4), and established the acoustic design principle of “controlling noise first, then shaping sound quality.”


1

Pre-construction site survey photographs (September 2024): unfinished floor and full-height glass curtain wall — sound insulation on the curtain-wall side was the foremost design challenge.


2.2 Design Concept: One Immersive Smart Studio, Four Operating Modes

The design proposal introduced the overall concept of an “immersive smart studio.” A circular LED floor screen and curved stage design create an enveloping visual experience, while an intelligent control system makes studio operation more convenient. The central control system simplifies the setup and operation of directing, lighting, audio and large-format displays, while programme automation standardizes and streamlines production workflows. One studio accommodates four scenarios: performance, presentation, conference and public-affairs interview modes. The main and auxiliary screens can operate separately or as one display; the circular floor screen delivers immersive effects; the conference title screen serves meeting scenarios; and lighting scenes can be recalled with a single command according to programme type.


The third-floor layout is divided by function into a 400 m² variety show studio (audience area and stage), directing/audio control room, television broadcast control room, men’s and women’s dressing/changing rooms, VIP room, audience lounge and performer waiting area. The circulation routes are kept separate: audience members enter from the lounge, performers reach the stage through the dressing rooms and waiting area, and VIP guests have independent access. This arrangement meets the workflow requirements of broadcast programme production.


2

Overall third-floor planning render: functional zoning for the studio, control room, dressing rooms, VIP room and waiting area.


2.3 Acoustic Design: Control Noise First, Then Shape Sound Quality

The acoustic design follows standards including GY/T 5086-2012, Acoustic Design Code for Radio and Television Recording (Broadcast) Rooms and Studios; GB 50118-2010, Code for Design of Sound Insulation of Civil Buildings; GY/T 5043-2013, Indoor Environmental Requirements for Technical Rooms in Radio and Television Centres; and GY 5022-2007, Measurement Specification for Reverberation Time in Radio and Television Announcer/Studio Rooms. During the proposal stage, ODEON architectural acoustics simulation software was used to model and verify the room sound field. The preliminary targets were a reverberation time of 1.0 s ±10% and a noise rating of NR-30. Following detailed design comparison, the final 400 Studio Acoustic Fit-Out Design Description adopted the principle of prioritizing speech intelligibility while retaining room for adjustment for music programmes. The final targets were a reverberation time of 0.65 ±0.1 s, a noise rating of NR-25 and a RASTI value of 0.65. A relatively short reverberation time improves speech clarity; when the sound reinforcement system is used, electroacoustic processing can add fullness. The NR-25 background-noise limit is also one grade stricter than the preliminary proposal, providing a quiet foundation for television recording.


Noise control is a major part of the acoustic design. The design documents systematically identify the sources and transmission paths of studio noise. Sources include outdoor traffic, conversations and activity elsewhere in the building, and noise generated inside the studio by air-conditioning equipment, lighting control systems, moving cameras and people. Noise travels through three main paths: vibration of walls and ceilings radiating into the room; airborne transmission through construction gaps and openings; and structure-borne transmission through rigid connections to the surrounding structure. The corresponding measures include Class B/Class A fire-rated acoustic doors with dedicated sound-insulating locks at entrances and exits; an acoustic observation window between the control room and studio; approximately 640 m² of 180 mm multi-damping lightweight acoustic partition walls; and individual sealing of all wall penetrations. A “Recording in Progress” indicator is installed at the studio entrance to prevent doors from being opened during recording.


The sound-absorption and interior construction details are specified layer by layer. The ceiling consists of approximately 500 m² of expanded-metal acoustic ceiling and a height-adjustable aluminium-panel ceiling above the stage. The walls feature shaped acoustic panels in the audience and stage areas, together with an approximately 280 m² star-cloth backdrop in the stage area. The acoustic-layer frame uses 50 × 100 mm galvanized steel tubes with anti-corrosion treatment; secondary framing uses light-gauge steel channels with a minimum wall thickness of 1.0 mm; and timber framing receives fire-retardant treatment in accordance with fire-safety requirements. Each bundle of ultra-fine glass wool is stitched to glass-fibre cloth at the four corners and centre to prevent settling that could reduce sound absorption. Finished-surface tolerances require a floor-to-ceiling height deviation of no more than 4 mm, with ceiling and floor flatness deviations below 2 mm. Plastic flooring is installed by zone over a self-levelling substrate, and the stage floor is raised. The overall construction is deliberately simple and practical, avoiding unnecessary complexity and directing the budget toward the acoustic elements that matter most.


2.4 Lighting System Design: Television Standards of 2,000 lx, 5,600 K and Ra ≥ 90

The lighting design complies with GY 5045-2006, Design Code for Lighting Systems in Television Studios, and GB 50034, Standard for Lighting Design of Buildings. The key requirements are a combined vertical illuminance of at least 2,000 lux from the key and performance-area lighting when the camera aperture is set to f/5.6; a stage-area colour temperature of 5,600 ±150 K; and a colour rendering index of at least 90 (continuous spectrum). These three requirements are essential for accurate skin-tone reproduction and consistent white balance in television images.


Lighting fixtures and control configuration: 38 LED panel lights provide even top lighting; 16 high-power LED spotlights provide key lighting. Effects lighting comprises 36 LED moving-head wash lights, 42 beam lights, 6 LED profile lights, 16 LED wash/profile lights, 20 LED PAR lights and 6 three-in-one moving-head fixtures. All are professional fixtures from the TERBLY brand by Guangzhou Haoyang, with approximately 180 fixtures in total. The control system uses a Lingyan W2 computer lighting console, together with a network processor unit (NPU), network decoders and 10 DMX signal amplifiers. A 96-channel power switch/direct-feed cabinet distributes the direct power circuits. With IP-based network control, lighting scenes can be edited online and recalled with one command, allowing immediate switching among performance, presentation, conference and public-affairs interview modes. The design also uses lighting creatively to reduce the need for stage set materials, creating scenery with light in a cost-effective and environmentally conscious way.


2.5 Sound Reinforcement System Design: Exceeding the Level I Performance Criteria

The sound reinforcement design is based on the Level I performance sound reinforcement criteria in GB 50371-2006, Code for Design of Sound Reinforcement Systems in Auditoriums, with individual performance targets further improved beyond the baseline. EASE electroacoustic simulation software is used to verify loudspeaker layout and coverage, ensuring an even sound field and clear speech throughout the audience area.


According to the cost-estimate documents, the system uses a fully digital audio signal chain. Its core is a Behringer WING 48-channel digital mixing console, equipped with a KLARK TEKNIK 64-channel Dante card (compatible with AES67) and a MIDAS DL251 stage I/O box with 48 microphone preamps. Digital processors handle zone equalization and delay alignment, supporting stable operation and analogue/digital backup. The loudspeakers are from Turbosound: eight TBV123 line-array speakers for left and right main reinforcement, two TBV118L array subwoofers, two dual-18-inch NuQ118B subwoofers and four NuQ122 full-range stage monitors, driven by HH-series amplifiers. The microphone inventory is sized for variety-show production: 12 Sennheiser handheld wireless microphone systems (single-channel), 12 Shure headworn microphones, 12 Sennheiser lavalier microphones, Shure dual-handheld wireless sets, and three four-channel wireless conference microphone systems. Choir condenser microphones, hanging microphones and a Shure antenna distribution system are also included, supporting simultaneous multi-person pickup for large-scale variety programmes.


2.6 LED Displays and Stage Visuals: P1.86 Main/Auxiliary Screens and a Circular LED Floor Screen

The video system is the visual foundation of the immersive concept (according to the cost-estimate documents). The main display uses a Leyard P1.86 fine-pitch LED screen measuring 11 m × 6 m, or approximately 66 m². Two auxiliary screens, each measuring 2.5 m × 6 m, provide a combined area of approximately 30 m² and can operate independently or together with the main screen. A P3.91 LED floor screen is installed at the front of the stage as a custom circular screen with an 8 m diameter and an area of approximately 50.24 m², creating immersive floor visuals. For conference use, an additional P4.75 title screen measures 18 m × 0.8 m. The control system includes a video wall processor, multimedia server and graphics processing cards. Receiving cards support multi-layer calibration and HDR, while the power distribution cabinet supports scheduled screen power-on and power-off. When separated, the two side screens can display different signals independently; when combined, they form one continuous background to meet the visual requirements of different programmes.


2.7 Stage Machinery and Technical Grid: Safety Above Everyone’s Heads

The stage machinery system supports lighting suspension, curtain movement and title-screen travel (according to the cost-estimate documents). A technical-grid steel structure is installed above the stage, using 16# channel steel for the main beams and 12# channel steel for the secondary beams. Two curved tracks and two straight tracks, with a lateral travel speed of 0.02–0.10 m/s and 1.1 kW motors, serve the moving LED-screen frame. The electric hoists use TYWT-400 single-layer drum winches. The installation includes 22 lighting-bar hoists, 5 flip-panel hoists and 1 title-screen hoist, for a total of 28 units, together with 22 square trusses in four lengths. The control system consists of a 42-circuit high-voltage power cabinet and a touchscreen low-voltage control console. It supports automatic and manual operation, upper and lower travel limits, over-travel protection, fire-break protection, anti-slack-rope protection and automatic error correction.

The design and manufacturing principles are also specified: a design service life of 25 years; a mean time between failures of 8,000–10,000 hours; a safety factor greater than 6 for general components and greater than 10 for lifting wire ropes; a stiffness ratio greater than 1/1,000 for load-bearing steel structures; and equipment noise below 60 dB for equipment not used during performances. For equipment suspended above audiences and performers, safety margins always take priority.


2.8 Intelligent Control: One-Touch Operation, System Integration and Programme Automation

The central control system adopts the HONG-CONTROL intelligent early-warning and control architecture (according to the cost-estimate documents). DELL integrated servers and workstations provide the hardware foundation. The software platform has three layers: an integrated basic platform for data acquisition and analysis and equipment/signal monitoring; a basic control platform for IP/baseband matrix scheduling; and a functional application platform for simulating the director’s video wall and arranging signal layouts. At the application level, it supports one-touch control, combining signal routing, graphics and titles, audio and lighting operations on a single interface for template-based execution; linked control, coordinating cameras, audio, display graphics and lighting according to programme scenes; and programme automation, using programme rundowns to create automation scripts and complete camera-shot language scripts. It also supports intelligent directing and pre-switching, and can synchronize with an outside broadcast van through LTC timecode. For a prefecture-level broadcaster, this platform converts a traditional production workflow involving multiple systems, operators and steps into template-based operation, directly improving production efficiency.


3. Before Construction: Contract Award and Site Preparation (From April 2025)

3.1 Open Tender: Contract Awarded at RMB 12.0558 Million

On April 11, 2025, Qingyuan Youce Project Management Co., Ltd., acting on behalf of Qingyuan Radio and Television Station, organized the public tender evaluation meeting for this project. The Letter of Award (Notice No. [2025001]) was issued on April 14. Guangzhou Saijia Acoustics & Lighting Engineering Co., Ltd. won the contract with a bid of RMB 12,055,823.00. The completion period was specified as “within 120 days from the effective date of the contract.” From the site survey and design proposal through the cost estimate, tender and award, the project’s preliminary technical preparation took approximately seven months. Thorough preparation at the outset helped ensure smoother implementation later.


3.2 Ten Technical Briefings: Bringing Workmanship Standards to Every Site Team

Before and around the start of construction, the project team completed ten technical briefings covering LED display acceptance and operation; plastic flooring installation; concealed-grid ceilings (solid aluminium panels); concealed-grid ceilings (light-gauge steel framing with gypsum board); raised access floors (anti-static flooring); installation of lights, switches and sockets; structured cabling; doors and windows; audio/video cabling (hum and grounding); and decorative panel installation (wood veneer panels). The dedicated briefing on audio/video cabling, hum and grounding addressed one of the most common quality problems in studio projects: electrical hum caused by poor grounding. It specified separate routing for audio/video signal cables and power cables, single-point grounding, and correct treatment of cable shields. The principle was clear: provide the briefing before work begins. Across the nine systems, equipment installation accounts for only about 30% of the work; the remaining 70% lies in fit-out substrates and cabling. The thoroughness of the technical briefings helps determine the minimum achievable quality of the finished project.


3.3 Detailed Design and Coordinated Services: Align Everything Before Work Begins

The technical-grid steelwork, 28 hoists, curved and straight tracks, lighting-bar positions, loudspeaker suspension points, LED-screen steelwork, power distribution and signal routes all had to fit within the 11 m floor height while accommodating the acoustic ceiling. Before construction, the team developed detailed technical-grid layout drawings, coordinated equipment installation positions and operating clearances, and worked with equipment manufacturers to confirm installation sequences and interface requirements. Setting-out and positioning were then coordinated on site, with strict control of the track-screen installation datum and spacing between lighting bars. Getting this stage right reduced rework during the multi-discipline activities that followed (see Chapter 4).


4. Key Construction Priorities and Challenges: Addressing Six Major Challenges

4.1 Challenge 1: Controlling Sound Transmission Through the Curtain-Wall Side

Challenge analysis: The curtain-wall side is a weak point in the studio’s sound insulation. Outdoor noise can easily pass through the glass curtain wall into the recording area, making it a key control priority during the early acoustic construction stage. Without adequate sound insulation, the NR-25 background-noise target cannot be achieved.


Solution: Special acoustic sealing details were used at curtain-wall gaps and connection joints to interrupt airborne sound paths. Vibration-isolation breaks were introduced at rigid connections between the curtain-wall side and the main structure to reduce structure-borne sound. After construction, dedicated sound-insulation testing was carried out on the curtain-wall side. The next construction stage could proceed only after test data confirmed compliance with the acoustic requirements.


4.2 Challenge 2: High Precision Required for Track-Mounted Screens and Lighting-Bar Layout

Challenge analysis: The installation accuracy of the track-mounted screen and the spacing between lighting bars directly affect lighting and display performance. Track deviations may cause the large-screen moving frame to jam, while incorrect lighting-bar spacing can result in uneven illumination and invalidate the lighting plot.


Solution: Setting-out and positioning were coordinated before construction, with strict control of the track-screen installation datum and lighting-bar spacing. Accuracy was checked throughout installation to ensure correct positioning and smooth operation, allowing the moving screens and hoists to operate independently without interference within the 11 m ceiling height.


4.3 Challenge 3: Coordinating Multiple Devices in the Technical Grid

Challenge analysis: The technical grid contains multiple types of equipment, including steel structures, tracks, hoists and large-screen frames. The layout is compact, and equipment installation clearances and operating paths may conflict, making coordination difficult.


Solution: Detailed technical-grid layout drawings were prepared before construction to coordinate equipment positions and operating clearances. The team communicated with each equipment manufacturer to confirm installation sequences and interface requirements and prevent mutual interference. Which equipment should be installed first, which should follow, and where clearance must be provided were all determined on the drawings before being implemented on site.


4.4 Challenge 4: Complex Multi-System Integration and Commissioning

Challenge analysis: The project covers fit-out, lighting, audio, acoustics and stage machinery, with a substantial amount of interface coordination and integrated commissioning across the nine systems. Each system may work correctly on its own, yet fail to operate smoothly when integrated with the others.


Solution: Dedicated technical personnel were assigned to coordinate commissioning. Testing was conducted in stages, beginning with individual systems and followed by cross-system integration. Lighting, audio, machinery and LED displays were first brought to their respective design targets; scene-based linked operation was then verified through the intelligent central control platform to ensure stable coordination and functional compatibility across all systems.


4.5 Challenge 5: Strict Requirements for Power Distribution and Load Management

Challenge analysis: The studio has a high electrical load. Approximately 180 lighting fixtures, more than 100 m² of LED screens, 28 stage hoists and multi-split air-conditioning units may operate simultaneously. Power circuits must therefore be allocated accurately and rationally; poor planning could create electrical safety risks and equipment failures.


Solution: Power circuits and load allocation were planned according to the load parameters of each item of equipment. The GCK low-voltage switchgear uses a tiered configuration of a primary main cabinet and secondary sub-cabinets, with ABB circuit breakers. Lighting, audio, machinery, LED displays and air conditioning are supplied by dedicated cables on independent circuits to avoid mutual interference. Qualified electrical components were selected and installed in strict accordance with applicable requirements. Energization tests and load tests were carried out after installation to ensure safe and reliable power distribution.


4.6 Challenge 6: Precision Customization and Installation of Wall Panels

Challenge analysis: Wall panels must be custom-manufactured to match the actual site height. Dimensional deviations can create oversized joints and an uneven appearance, directly affecting the overall finish. Acoustic wall surfaces must perform both a functional role and an aesthetic one.


Solution: Installation heights were measured on site before construction, and accurate custom-manufacturing dimensions were issued. When the panels arrived, their dimensions were checked before installation. Joint widths were carefully controlled to ensure a flat, consistent finished appearance.


5. Completion: Delivery Within 120 Days and Four Operating Modes

After the contract took effect, the project team worked backwards from the 120-day overall programme to organize construction: detailed design → concealed works (acoustic construction and cable routing) → fit-out substrates and finishes → technical-grid steelwork and hoist installation → installation of lighting fixtures, loudspeakers, LED screens and machinery → individual system commissioning → cross-system integrated commissioning. Fit-out, lighting, audio, machinery, LED displays and central control were carried out concurrently in the same space. The coordinated layouts described in Chapter 3 and the precision controls in Chapter 4 supported on-time delivery.


After completion, the studio can switch rapidly among four operating modes. In performance mode, the main and auxiliary screens combine and the lighting is fully activated; the circular LED floor screen and curved stage design create an immersive stage. In conference mode, the rostrum and title screen are put in place, and the lighting switches to evenly distributed conference key lighting. Public-affairs interview mode uses face-to-face seating and a themed background to create a current-affairs programme setting. Presentation mode emphasizes the presenter with dedicated key lighting and separately displayed background screens. The following design-stage renderings illustrate the intended appearance of each mode after completion:


3

Performance-mode design rendering: combined main and auxiliary screens, lighting trusses and circular LED floor screen (design rendering).


4

Conference-mode design rendering: separated main-screen presentation, rostrum and audience seating layout (design rendering).


5

Public-affairs interview-mode design rendering: “Qingyuan on the Issues” themed stage design and face-to-face seating (design rendering).


6. Acceptance: Closing the Loop Through Integrated Commissioning and Performance Testing

Acceptance of broadcast and television engineering projects requires complete documentation, compliance with performance targets and a closed-loop process. The acceptance sequence for this project includes: sectional inspection of concealed works (acoustic construction and cable routing) → equipment unpacking and inventory, followed by individual power-on checks → individual system commissioning → cross-system integrated commissioning → acoustic and sound reinforcement performance testing → handover of as-built documentation and user training.


Key acceptance points for each system: Acoustics — studio reverberation time is measured in accordance with GY 5022-2007, Measurement Specification for Reverberation Time in Radio and Television Announcer/Studio Rooms, against the design value of 0.65 ±0.1 s; background noise is checked against NR-25; and sound insulation on the curtain-wall side is verified against the dedicated test report. Sound reinforcement — the Level I performance criteria in GB 50371-2006 are tested item by item, including maximum sound pressure level, transmission frequency response, sound-field non-uniformity and transmission gain. Measurement follows GB/T 4959, Methods of Measurement for Sound Reinforcement Characteristics in Auditoriums, and acceptance procedures refer to GB/T 28048, Code for Acceptance of Sound Reinforcement Systems in Auditoriums and Sports Venues. Lighting — key-light and performance-area vertical illuminance (≥2,000 lux at f/5.6), colour temperature (5,600 ±150 K) and colour rendering index (Ra ≥90) are verified. Machinery — each of the 28 hoists is tested for upper/lower travel limits, over-travel protection, fire-break protection and anti-slack-rope functions, with inspection referring to GB/T 36727, Acceptance and Inspection Specification for Stage Machinery. Power distribution — energization and load tests are completed. Actual measured values for all indicators should be taken from the final acceptance documentation; no values are substituted or assumed in this article.


Technical training is provided as part of handover. Courses cover operation of professional lighting consoles, Vectorworks stage and lighting design, MIDAS digital mixing consoles and Allen & Heath digital mixing consoles. This enables the station’s technical staff to take over daily operation of the nine systems and programme production smoothly.


7. FAQ: Frequently Asked Questions About Variety Show Studio Projects

Q: What systems are generally included in the construction of a 400 m² variety show studio?

A: A complete variety show studio generally includes nine systems: acoustic fit-out (sound-absorbing and sound-insulating construction, fire-rated acoustic doors and observation windows); stage lighting (key lighting, top lighting, effects lighting and networked dimming); sound reinforcement (digital mixing console, line-array main speakers, stage monitors and wireless microphone systems); LED displays (main screen, auxiliary screens, floor screen and title screen); stage machinery (technical-grid steelwork, tracks and electric hoists); intelligent central control; power distribution; air conditioning; and furniture. This project is an integrated delivery case covering the full system.


Q: Why is the reverberation time of a variety show studio set at around 0.65 seconds?

A: Variety show studios mainly host speech-based and interview programmes. A relatively short reverberation time improves speech clarity and intelligibility. The fullness required for music and dance programmes can be added through reverberation effects and equalization compensation in the sound system’s digital processors. In simple terms, reverberation can be added electroacoustically, but it is difficult to remove through room acoustics. A target of 0.65 ±0.1 s, together with a RASTI value of 0.65, is a classic broadcast-studio approach: clarity first, fullness second.


Q: How can sound insulation be addressed when a studio is built next to a glass curtain wall?

A: Glass curtain walls have limited sound insulation and therefore require dedicated acoustic construction. Gaps and connection joints must be sealed to interrupt airborne sound transmission, while vibration isolation should be applied to rigid connections between the curtain wall and the main structure to reduce structure-borne sound. After construction, actual sound-insulation performance must be measured and verified. In this project, sound insulation on the curtain-wall side was identified as the top construction priority and protected through both dedicated sealing details and special testing.


Q: How does studio lighting differ from ordinary stage lighting?

A: The key difference is that studio lighting is designed for cameras. At a camera aperture of f/5.6, the vertical illuminance from key lighting and in the performance area must be at least 2,000 lux, the colour temperature must be 5,600 ±150 K, and the colour rendering index must be Ra ≥90. These requirements help maintain stable exposure and natural skin tones on television. Ordinary stage lighting places greater emphasis on the audience’s live experience and generally has less demanding requirements for illuminance and colour-temperature consistency. Studios therefore tend to use high-CRI LED panels and spotlights, with particular attention paid to even key-light coverage.


Q: What roles do LED floor screens and title screens play in a studio?

A: The LED floor screen is installed on the stage floor near the front and can create immersive effects such as visual extensions and interactive performer movement. It is a signature feature of an immersive studio. The title screen displays meeting titles and event names in conference and government-affairs scenarios. Using one venue for multiple purposes allows rapid transitions among galas, conferences and public-affairs programmes, improving space utilization.


Q: How is the safety of stage machinery hoists ensured?

A: Safety is protected by four layers. First, engineering calculations verify the technical-grid steel structure, suspension-point loads and wire-rope safety factors (greater than 10). Second, each hoist is equipped with upper/lower travel limits, over-travel protection, a fire-break device and anti-slack-rope protection. Third, the control system supports both automatic and manual operation, together with automatic error correction. Fourth, acceptance testing checks the travel limits, over-travel protection and fire-break functions of every unit, followed by regular maintenance. For equipment above audiences and performers, safety margins must always come before visual effects.


Q: How should an organization select a contractor for a broadcast studio project?

A: Five areas deserve particular attention: experience with comparable broadcast studio projects; records of winning and fulfilling government procurement contracts; the ability to integrate acoustics, lighting, audio, video and stage machinery (avoiding disputes among multiple subcontractors); an in-house commissioning and training team; and familiarity with broadcast and sound reinforcement standards such as GY/T 5086 and GB 50371. In this case, the contractor won through an open tender and completed detailed design, installation and integrated commissioning of all nine systems within the 120-day programme.


8. Common Pitfalls: Five Misconceptions About Variety Show Studio Projects

Misconception 1: Studio acoustics are just ordinary interior decoration — as long as it looks good, it is fine.

A: Studio acoustics must meet a defined set of performance criteria, centred on GY/T 5086-2012, including reverberation time, background noise and sound insulation. The material, thickness, cavity and density of sound-absorbing materials directly affect whether these targets can be achieved. Selecting materials solely for appearance, as in ordinary decoration, often leads to excessive reverberation and noise interference during recording. The correct approach is to involve acoustic design and detailed fit-out design at the same time, with a specific treatment strategy for each surface.


Misconception 2: Studio lighting is just ordinary lighting plus a few moving lights.

A: Television lighting is designed to camera standards. If illuminance, colour temperature and colour rendering index do not meet requirements, the television image may have colour casts, appear too dark or reproduce skin tones inaccurately. Ordinary lighting fixtures generally cannot meet broadcast requirements for colour rendering and colour-temperature consistency. The result of using them in a studio is a loss of broadcast image quality.


Misconception 3: Close up the ceilings and walls first, then add the cables and equipment later.

A: If boards are closed before coordinated services are installed during overlapping construction activities, later cable additions may damage finished surfaces; drilling new openings can also compromise acoustic construction. The correct approach is to complete drawing reviews and technical-grid coordination first, agree on cable routes and reserve all required points, and close up concealed works only after staged inspections and acceptance.


Misconception 4: If there is electrical hum in the audio/video system, simply replace the equipment.

A: Most electrical hum problems originate in grounding and cable-installation practices. Parallel routing of power and signal cables, grounding both ends of a cable shield and creating a ground loop, or failing to meet grounding-resistance requirements cannot be solved simply by replacing equipment. This project issued a dedicated technical briefing on audio/video cabling, hum and grounding to address the problem at its source through correct routing and grounding practices.


Misconception 5: Install each of the nine systems separately and treat integrated commissioning as a formality.

A: The value of a variety show studio lies in one-touch operation and integrated control. If lighting, audio, LED displays and machinery are not tested together, operators will have to manually reconfigure equipment every time the studio changes modes, significantly reducing production efficiency. Individual systems must first be commissioned in stages, followed by integrated verification against actual programme scenarios. Only then can the project be considered fully delivered.


9. Applicable Standards and Codes

The main current standards relevant to the design, construction and acceptance of this project are listed below:

Category

Standard No.

Standard Title

Studio Acoustics

GY/T 5086-2012

Acoustic Design Code for Radio and Television Recording (Broadcast) Rooms and Studios

Acoustic Measurement

GY 5022-2007

Measurement Specification for Reverberation Time in Radio and Television Announcer/Studio Rooms

Acoustic Environment

GY/T 5043-2013

Indoor Environmental Requirements for Technical Rooms in Radio and Television Centres

Permissible Noise

GYJ 42-1989

Permissible Noise Standard for Technical Rooms in Radio and Television Centres

Building Sound Insulation

GB 50118-2010

Code for Design of Sound Insulation of Civil Buildings

Sound Reinforcement Design

GB 50371-2006

Code for Design of Sound Reinforcement Systems in Auditoriums

Sound Reinforcement Measurement

GB/T 4959-2011

Methods of Measurement for Sound Reinforcement Characteristics in Auditoriums

Sound Reinforcement Acceptance

GB/T 28048-2011

Code for Acceptance of Sound Reinforcement Systems in Auditoriums and Sports Venues

Speech Intelligibility

GB/T 15508-1995

Acoustics — Methods for Testing Speech Intelligibility

Studio Lighting

GY 5045-2006

Design Code for Lighting Systems in Television Studios

Lighting Design

GB 50034-2013

Standard for Lighting Design of Buildings

Theatre Buildings

JGJ 57-2016

Code for Design of Theatre Buildings (Section 6.3: Stage Machinery)

Suspension Safety

WH/T 28-2007

Stage Machinery — Safety of Overstage Equipment

Machinery Acceptance

GB/T 36727-2018

Acceptance and Inspection Specification for Stage Machinery

Dimming Equipment

GB/T 14218-2018

Performance Parameters and Test Methods for Electronic Dimming Equipment

Fit-Out Acceptance

GB 50210-2018

Standard for Quality Acceptance of Building Decoration and Fit-Out Works

Structured Cabling

GB 50311-2016

Code for Design of Generic Cabling Systems

Fire Safety Design

GB 50016-2014 (2018 Edition)

Code for Fire Protection Design of Buildings

Electrical Installation

GB 50303-2015

Code for Acceptance of Construction Quality of Building Electrical Works

Lightning Protection and Grounding

GB 50057-2010

Code for Design of Lightning Protection of Buildings


10. Service Areas

Guangzhou Saijia Acoustics & Lighting Engineering Co., Ltd. undertakes acoustic fit-out and integrated lighting, audio and stage machinery projects for studios, integrated media centres, recording studios, theatres, concert halls, multi-purpose halls and auditoriums in China and overseas. Its primary service regions include South China, East China, Central China and Southwest China. In Guangdong, the company has extensive experience supporting radio and television stations and integrated media centres in Guangzhou, Shenzhen, Foshan, Dongguan, Qingyuan, Shaoguan, Zhaoqing and Zhanjiang. It provides end-to-end services, from concept design, preliminary cost estimates and government procurement tender submissions to acoustic fit-out, integrated installation of lighting, audio, stage machinery, LED displays and central control, system commissioning, acceptance and training.


Guangzhou Saijia Acoustics & Lighting Engineering Co., Ltd. | Tel: +86 20 8629 9208 | Address: Room 615, Building 3, No. 135 Huangyuan Road, Baiyun District, Guangzhou, China

Content Menu
CONTACT
Add: Room 615, Building 3, No. 135 Huangyuan Road, Baiyun District, Guangzhou City, Guangdong Province
E-mail: saijia.avl@gmail.com
Mobile: +86-13802436547,  +86-18600228211
INFORMATION
Sign up to receive our weekly newsletter
Contact us
Copyright © 2026 Guangzhou Saijia Acoustic & Lighting Engineering Co., Ltd. (SJAVL)